How to Navigate Packaging Regulations: A Step-by-Step Framework

India’s packaging landscape is one of the most tightly regulated in the world, and the rules keep evolving. Whether you are launching a food brand, a wellness product, or a fast-moving consumer good, getting your packaging wrong is not just a design misstep, it can trigger enforcement action, market withdrawal, and serious reputational damage. This […]

India’s packaging landscape is one of the most tightly regulated in the world, and the rules keep evolving. Whether you are launching a food brand, a wellness product, or a fast-moving consumer good, getting your packaging wrong is not just a design misstep, it can trigger enforcement action, market withdrawal, and serious reputational damage. This guide walks through the packaging regulations India-based brands need to understand and offers a practical, step-by-step compliance framework you can apply to any product category.

The regulatory picture spans multiple agencies, FSSAI, BIS, CPCB, Legal Metrology, and state-level food safety departments, each with overlapping but distinct requirements. Rather than treating compliance as a final check, the most reliable approach is to bake it into your design process from the start. That is what we will cover here, drawing on real packaging work we have done for brands in Chennai and across India.

The Regulatory Landscape: Who Sets the Rules

Before you can design compliant packaging, you need to understand which bodies govern your specific product. In India, the primary regulators are:

  • FSSAI (Food Safety and Standards Authority of India), governs all packaged food products. The FSSAI Packaging and Labelling Regulations, 2011 (subsequently amended) are the most directly applicable rules for food brands. They cover everything from font size on labels to mandatory nutritional information, FSSAI logo placement, and best-before date formatting.
  • BIS (Bureau of Indian Standards), mandatory certification is required for certain product categories, including packaged drinking water (IS 13428), milk packets, and specific food items. BIS certification carries the ISI mark, and failing to obtain it where required is a penal offence.
  • CPCB (Central Pollution Control Board), enforces the Plastic Waste Management Rules, which govern what materials you can use, how thick your plastic packaging must be, and whether it carries recycling markings or EPR (Extended Producer Responsibility) declarations.
  • Legal Metrology Department, enforces the Legal Metrology (Packaged Commodities) Rules, 2011, which mandate how net quantity, MRP, and manufacturer details are displayed on every pre-packaged commodity.

For food businesses, FSSAI is almost always the primary authority. But if your product also involves plastic packaging, CPCB rules apply simultaneously. And if it falls under a BIS-mandated category, that certification is non-negotiable before you go to market. The first step in any compliance framework is therefore identifying all applicable regulators for your product, not just the most obvious one.

Mandatory Label Elements Under FSSAI

The FSSAI label requirements are detailed and specific. The authority divides mandatory information into several categories, and every label must carry all of them before the product reaches the consumer. Here is what you need to include:

  • FSSAI logo and licence number, must be prominently displayed. The logo is distinct and must not be altered or combined with other graphics in a way that obscures it.
  • Product name, the common or usual name of the product, in a type size that is at least 3 mm for small packs and 4 mm for larger ones. This is one of the most commonly overlooked details in initial design drafts.
  • Net quantity, declared in metric units (grams, millilitres, litres). For multi-piece packs, the net weight per piece and total net weight must both appear.
  • List of ingredients, in descending order of weight at the time of manufacture. Ingredients that make up less than 2% of the product can be listed at the end, but allergens, nuts, dairy, gluten, soy, must be highlighted.
  • Nutritional information, a mandatory nutrition facts panel showing energy, protein, carbohydrates, fat, sugar, and sodium per 100g or 100ml, and per serving if the serving size is declared.
  • Best-before / use-by date, date format must follow DD/MM/YYYY or an equivalent approved format. For products with a shelf life under seven days, the manufacturing date is sufficient in some cases, but this varies by product category.
  • Manufacturer details, name and complete address of the manufacturer, packer, or seller. For imported products, the importer’s details are required.
  • Country of origin, required for imported products.
  • Vegetarian / non-vegetarian symbol, the green dot (vegetarian) or brown dot (non-vegetarian) must be on every packaged food product.

Getting these elements wrong is easier than you might think. Type sizes that are even slightly below the minimum threshold, ingredient lists that skip the allergen declaration, or date formats that mix month and day positions, any of these can trigger a non-conformance notice. When we designed the Naga’s Gold rice packaging, for example, nutritional clarity and label correctness were central to the brief, because the product would be sold through retail channels where FSSAI inspectors routinely check labelling.

Packaging Material Compliance and Safety

The material your packaging is made from is just as regulated as what goes on the label. India’s food contact material rules, administered through FSSAI, restrict the use of certain chemicals, heavy metals, and printing inks in direct-contact packaging. The key areas to watch are:

  • Migration limits, substances that can migrate from packaging into food must stay below limits set by FSSAI. This is particularly relevant for flexible plastic pouches, printed laminates, and inks that touch the food side of a package.
  • Plastic thickness requirements, the Plastic Waste Management Rules set a minimum thickness of 50 microns for single-use plastic carry bags. While this applies more to retail bags than primary packaging, it signals the regulatory direction and many brands choose to meet or exceed this across all their packaging formats.
  • Recyclability and EPR, Extended Producer Responsibility requires brands to account for the end-of-life management of their packaging. If your packaging is not recyclable or compostable, you may need to pay EPR fees or partner with a PRO (Producer Responsibility Organisation) to manage waste compliance.

Material compliance is not something to leave to your printer. At the specification stage, before any print run is approved, your packaging supplier should be able to provide a declaration of conformity confirming that the materials, inks, and adhesives meet FSSAI’s food contact regulations. Without that declaration, your packaging could be rejected at port, in a retail audit, or by an FSSAI inspector.

Environmental and Sustainability Requirements

India’s sustainability regulations around packaging are tightening fast. The Plastic Waste Management (Amendment) Rules, 2024, introduced stricter targets for recycled content in plastic packaging, phased bans on certain single-use items, and more rigorous labelling requirements for compostable and biodegradable materials.

Key sustainability mandates that directly affect packaging design include:

  • Recycled content targets, certain categories of plastic packaging must now include a specified percentage of recycled plastic, with targets escalating year on year. Designers need to account for this in material selection early.
  • Compostable packaging certification, if you label a material as compostable or biodegradable, it must carry the CPCB certification mark. Unverified “green” claims on packaging can attract penalties under both CPCB rules and consumer protection law.
  • Elimination of specific single-use plastics, items like polystyrene foam and certain plastic wrapping formats are being phased out. If your product category is affected, reformulating your packaging structure is a compliance necessity, not a preference.

The print and packaging category on our blog covers many of these evolving requirements in more detail, including case studies on how brands are adapting their material choices in response to new CPCB mandates.

The BIS Certification Process for Mandatory Products

For product categories where BIS certification is mandatory, the process follows a defined sequence. Understanding this sequence helps you plan timelines accurately, because BIS approval can take anywhere from four to twelve weeks depending on the product type and the availability of testing facilities.

The process typically involves: first, submitting an application along with product samples to a BIS-recognised laboratory. Second, the lab conducts testing against the relevant Indian Standard specification. Third, if the samples pass, BIS issues a certification licence, which must then be displayed on the packaging, usually as the ISI mark along with the licence number. Fourth, manufacturers are subject to periodic surveillance and factory audits to ensure ongoing compliance. Skipping any step means your product cannot legally carry the ISI mark, and without the ISI mark, it cannot be sold.

Timeline management around BIS certification is critical. A common mistake is finalising a print-ready packaging design before certification is granted, which means either you are printing unmarked packaging (which is a compliance gap) or you have to go back and modify the approved artwork once the licence number arrives. We always recommend leaving a placeholder area in your design for the ISI mark and licence number so that the final print run can incorporate them without a redesign.

A Step-by-Step Compliance Framework

With the regulatory landscape mapped, here is a practical framework you can apply to any packaging project. The idea is to embed compliance checks at specific design milestones rather than treating it as a final sign-off step.

Step 1: Map Applicable Regulations

Before any design work begins, list every regulatory body that applies to your product. For a packaged food item, this will almost always include FSSAI and Legal Metrology, and possibly BIS and CPCB depending on the product and packaging material. For a non-food product, the mix will be different, the Bureau of Indian Energy Efficiency (BEE) covers certain appliances, for example. The output of this step is a simple checklist of applicable requirements that your design must satisfy.

Step 2: Audit Your Packaging Supplier’s Declarations

Request a Declaration of Conformity from your packaging manufacturer confirming that the substrate, inks, adhesives, and any direct-contact materials meet FSSAI food-contact regulations. For plastic packaging, also request documentation on thickness, recycled content percentage, and recyclability classification. This documentation is your evidence base if a regulator asks for it later.

Step 3: Create a Label Compliance Checklist

Work through the mandatory label elements, not just what information is needed, but exactly where it sits, what type size it uses, and in what order. Many brands use a written label brief that mirrors the FSSAI specification, so that the designer and the brand manager are working from the same requirements document. Here is a simplified comparison of how common product categories differ in their label obligations:

Label ElementPackaged Food (FSSAI)Non-Food Consumer Goods (Legal Metrology)Cosmetics & Personal Care
FSSAI logo / licence numberMandatoryNot applicableNot applicable
Net quantityMandatory (metric units)Mandatory (metric units)Mandatory (metric units)
MRP declarationNot required by FSSAI (Legal Metrology applies)MandatoryMandatory
Ingredient listMandatory (descending order)Not requiredMandatory (INCI nomenclature)
Nutritional informationMandatory nutrition facts panelNot requiredNot required
Best-before dateMandatoryNot required (unless perishable)Period after opening (PAO) symbol
Manufacturer addressMandatoryMandatoryMandatory
Vegetarian / non-veg symbolMandatoryNot requiredNot required
BIS / ISI markIf product category is BIS-mandatedNot applicableNot applicable

This table is a starting point, not a definitive reference. Product-specific exceptions exist, and requirements can change. Always cross-reference with the current version of the relevant regulation before finalising your label design. For packaging that demands expert execution alongside regulatory rigour, our printing and production service covers the full lifecycle from design review through prepress and print launch.

Step 4: Design With Compliance Constraints Built In

The best time to address compliance is at the design stage, not after the artwork is finalised. When every element has a designated minimum size, a required position, and a mandated font treatment, the designer is working within real constraints. This is where the Naga’s Gold packaging project provides a useful reference: we designed the label with clear nutritional panels, prominent FSSAI logo placement, and a scalable layout that works across five different pack sizes, from 5kg to 26kg. The design system we created ensured that every variant automatically met the same typographic minimums without requiring individual redesigns.

Similarly, the Alli Naturals masala packaging used a full label system built around clear ingredient hierarchies, which kept the ingredient list readable and properly ordered while maintaining the brand’s organic, premium visual language.

The principle is this: compliance constraints are not a creative burden. They are design parameters. The brands that make packaging stand out in the market are the ones that solve for both, compelling visual identity and rigorous regulatory adherence.

Step 5: Run a Pre-Production Compliance Review

Before any print order is released, conduct a formal compliance review against your checklist. This should be done by someone who was not involved in the design, because fresh eyes catch mistakes that familiarity hides. Key items to verify include: all mandatory text is present and correct, type sizes meet minimum thresholds, the FSSAI logo or BIS mark is in the right position and has not been distorted, the ingredient list is in descending order, allergens are clearly flagged, the best-before date format is correct, and MRP is displayed per Legal Metrology requirements.

Step 6: Manage Certification Approvals Before Print

If your product requires BIS certification, make sure the approval is in hand before the final print run. This means submitting samples early and tracking the process. For FSSAI, you need a valid licence number, and for products regulated under Legal Metrology, the correct declarations must be in place. Never proceed to a large print run while certifications are still pending, the cost of a rejected batch or a recalled product far outweighs the cost of holding the print job for a few weeks.

Step 7: Maintain Ongoing Compliance Records

Packaging regulations are not static. FSSAI periodically issues amendments, BIS revises standards, and CPCB updates the Plastic Waste Management Rules. The final step in the framework is to build a system that tracks regulatory changes relevant to your product category. Subscribe to FSSAI notifications, monitor BIS amendments, and review your packaging at least annually, or whenever you make a material or formulation change, to confirm it still meets current requirements.

Common Packaging Compliance Mistakes

Even experienced brands make packaging compliance errors. The most frequent ones we see in the Indian market are:

  • Using the wrong date format, FSSAI requires DD/MM/YYYY or a variant. Writing dates as MM/DD/YYYY (the American format) or as unstructured text (“Best by October 2025”) can fail an inspection.
  • Omitting the vegetarian / non-vegetarian symbol, this is one of the most basic requirements and one of the most commonly missed elements on initial label drafts.
  • Under-sizing type, the minimum type size for certain mandatory elements is specified in millimetres. Designers working in points or pixels can easily miss this if they do not convert carefully.
  • Incorrect ingredient ordering, ingredients must be listed from highest to lowest quantity at the time of manufacture. Herb or spice blends in a masala or sauce often trip this up, because the combined weight of minor seasonings is not the same as the weight of each individual ingredient.
  • Skipping allergen declarations, any ingredient that is a common allergen must be specifically highlighted, not just listed. This is a safety issue, not just a regulatory one.
  • Using unverified sustainability claims, claiming packaging is “100% recyclable” or “fully biodegradable” without the relevant CPCB or BIS certification can attract penalties under consumer protection law, which has been increasingly active on misleading environmental claims.

Each of these mistakes is avoidable with a systematic checklist and a pre-production review. The cost of catching them at the design stage is minimal. The cost of discovering them after a retail listing or a regulatory inspection is significant.

Building a Scalable Design System for Multi-Variant Products

If your brand has multiple SKUs, pack sizes, or product lines, the most efficient way to stay compliant across the range is to build a design system rather than creating each label from scratch. A design system codifies the rules, type minimums, logo clear space, mandatory label element positions, colour palettes, and structural templates, so that every new variant is automatically consistent.

We applied this approach for Naga’s Gold, where a single packaging system needed to work across six weight variants. By building the label around a modular grid with fixed zones for mandatory information, we ensured that every pack size carried the same correctly positioned FSSAI details, nutritional panels, and brand elements without requiring individual redesigns. When a brand later adds a new SKU, the design team simply adapts the existing template, compliance is inherited, not re-established from scratch.

A modular approach also makes it easier to respond to regulatory amendments. When FSSAI updates a requirement, for example, a new mandatory declaration or a revised nutrition panel format, you update the template once, and every variant is corrected simultaneously. That is a significant operational advantage over managing each label independently.

What to Expect From a Regulatory Audit

Understanding what an FSSAI or Legal Metrology inspection actually looks like helps you prepare more effectively. Inspectors typically review the physical packaging against the label registration on file, check that the FSSAI licence number is valid and matches the registered product details, verify that the net quantity declaration matches the actual fill, and confirm that mandatory elements are present and correctly formatted.

They do not usually test packaging material compliance on-site, but if they have reason to suspect a violation, visible damage to packaging, a consumer complaint, or a routine sample, they may collect samples for laboratory testing. That is why your packaging supplier’s Declaration of Conformity is such an important document. It is your proof that the material was manufactured to meet food-contact standards, and it should be kept on record alongside your packaging approval files.

Frequently asked questions

Do all packaged food products sold in India need FSSAI labelling?

Yes. FSSAI labelling requirements apply to all pre-packaged food products offered for sale in India, regardless of brand size, sales channel, or price point. This includes products sold online, through modern retail, through kirana stores, or at farmers’ markets. The only products exempt from labelling requirements are those sold loose and weighed at the point of sale, and even then, some information must be displayed at the retail location.

What happens if my packaging does not meet FSSAI requirements?

If a product is found to have labelling that does not comply with FSSAI regulations, the authority can issue a notice requiring correction, seize non-conforming stock, impose fines, or, in serious cases, initiate prosecution. The product can also be pulled from retail shelves. The practical cost of a compliance failure, product recall, brand damage, lost listings, is almost always far higher than the cost of getting it right the first time.

Is BIS certification required for all food packaging?

No. BIS certification is mandatory only for specific product categories designated under BIS rules, for example, packaged drinking water, milk products in certain formats, and specific infant food products. It is not universally required for all food packaging. However, some retail buyers do request BIS compliance voluntarily even for categories where it is not mandatory, as a quality assurance signal. Check the BIS product certification schedule to confirm whether your specific product falls under a mandatory certification requirement.

Can I make environmental claims on my packaging without CPCB certification?

Claims like “biodegradable,” “compostable,” or “100% recyclable” must be supported by valid certification from the relevant authority. For compostable packaging, CPCB certification is required. For recyclability claims, you should have documentation from an accredited body confirming that the packaging material is accepted in Indian recycling streams. Making unsubstantiated environmental claims can attract penalties under both CPCB rules and the Consumer Protection Act, and the regulatory focus on greenwashing has been increasing.

How often do packaging regulations change in India?

Regulatory updates occur regularly. FSSAI issues amendments and notifications several times a year. The Plastic Waste Management Rules have been amended multiple times since 2016, with significant changes in 2024. BIS periodically revises product standards. The practical approach is to review your packaging compliance at least once a year and immediately whenever you launch a new product, change your packaging material, or receive a regulatory notification that affects your category.

Should I work with a specialist or can my regular design agency handle packaging compliance?

A design agency that understands packaging compliance will work with you to incorporate regulatory requirements into the creative brief, not treat them as an afterthought. The key is to brief the agency with the full regulatory context, the applicable regulations, mandatory label elements, and any BIS or CPCB requirements, so that compliance is designed in from the start. At Monk Creatives, we always begin packaging projects with a regulatory requirements workshop to make sure the design team and the brand team are aligned on every mandatory element before a single layout is sketched. You can reach us at our contact page to discuss your packaging project and compliance needs.

Need help navigating packaging regulations India brands must follow? At Monk Creatives, we combine regulatory rigour with strong design thinking to deliver packaging that is both compliant and compelling. Based in Chennai, we work with brands across India and internationally on every aspect of packaging design, from label compliance audits and regulatory consultation through to complete brand identity systems and print-ready artwork. Get in touch at https://monkcreatives.com/contact-us/ or email info@monkcreatives.com to start the conversation.

Leave a Reply

Your email address will not be published. Required fields are marked *

Let's Create Together

Tell us about your brand — our creative team gets back to you fast with fresh ideas and clear next steps.

  • Branding, design & content that stands out
  • A dedicated creative team for your brand
  • Transparent pricing — no hidden fees

Get a Free Consultation

Takes 30 seconds

Select a service…
  • Branding & Identity
  • Logo Design
  • Graphic Design
  • Web Design & Development
  • Social Media Management
  • Content Creation
  • Search Engine Optimization (SEO)
  • Digital Marketing
  • Video & Motion
  • Other